TC Double Bender – the Bending Machine with Two Bending Flanges
Sophisticated profiles in façade and roof construction often contain z-bends. On conventional bending machines such profiles must be repeatedly rotated and turned during the bending operation. With the double bender, such manual handling is a thing of the past. The sheet metal is held by grippers, which move the profile to its next position. Depending on requirements, the sheet metal is bent upwards or downwards according to the preset angle.
The bending flanges must exhibit high precision and an extremely accurate synchronous run in order to guarantee perfect dimensional and angle accuracy.
The machine has a modern and highly dynamic hydraulic drive system, enabling operation at high speeds, the bending flanges requiring less than 2 seconds to swivel out by 140 degrees. The speed can be automatically and infinitely reduced and adjusted to the metal profile lying outside the machine to avoid damage to the already bent profile. The recently developed DS 3000 controller with 15" touch screen is easy to use and operates with user-friendly software.
The TC-300 is available in lengths of 1.5 (4.9 ft) to 10 meters (32.8 ft) and inlaid depth up to 2000 mm (6.56 ft), whereby its modular concept allows the construction of even longer machines. This model has a bending capacity of 3 mm (0.12”) for sheet steel (400 N/mm2) and 4 mm (0.16”) for aluminium (220 N/mm2) respectively.
- High operating speeds thanks to maximum stability
- New synchronization system for even more precise bending
- User-friendly CNC equipment to satisfy the highest expectations
Technical Data | 
Folder TC-300